Flame treatment conveyor belt system
Flame treatment conveyor with control panel, gas train, and interlocked burner enclosure
Stainless steel mesh belt entering the enclosed burner of the flame treatment conveyor

Flame Treatment Conveyor

Inline flame treater for plastics, panels and molded parts

  • Burner lengths from 6″ to 35″, sized to your part
  • Burner height sets from 1″ to 30″+ above the belt with quick clamps
  • Stainless steel mesh belt on a welded, powder-coated steel frame
  • Enclosed burner with interlocked doors: open a door and the system shuts down

Treating cylindrical products? See the Flame 360 →

See the flame conveyor run

Parts ride the belt under the burner.

Flame treatment conveyor

Get a flame conveyor quote

Tell us your part and material.

Call a sales engineer860-677-6400

    First Name (required)

    Last Name (required)

    Company (required)

    Telephone Number (required)

    Email (required)

    Your Message








    Industrial-grade inline flame treatment

    An inline flame treater built around a stainless steel mesh belt and a fully enclosed burner. Parts ride under the flame at a set speed, so every part gets the same treatment every time.

    6″ to 35″Burner lengths, sized to your part.
    1 to 50 ft/minTwo selectable belt-speed ranges.
    120V · 80 PSIStandard shop utilities. No special service.
    Made in USADesigned and built in Farmington, CT.
    • Consistent surface treatment. Systematic Automation’s Flame Treatment Conveyor is a rugged, industrial-grade system that delivers consistent, reliable surface treatment to a wide range of products. It raises surface energy for better ink, coating, and adhesive bonding by precisely controlling flame exposure as parts move through the burner on a continuous belt.
    • Standard utilities. The system runs on either propane or natural gas and needs only standard 120V electrical power and 80 PSI of compressed air, so it integrates into an existing production environment without special utilities.
    • Tailored to your application. Burner configuration and conveyor speed are fully adjustable, so the machine is tailored to the exact requirements of your application.
    • Why flame treat. Flame treatment is a fast, low-cost way to prepare plastics and other low-surface-energy materials for printing, coating, or bonding. The flame oxidizes the surface and burns off oils and contaminants, so ink and adhesive hold instead of flaking.
    • Why on a conveyor. A conveyor flame treater does that work inline. Parts ride a stainless mesh belt under a fixed burner at a controlled speed, so every part sees the same flame for the same time. No operator variability, no hand-passing. Feed it from an upstream process or load by hand, then pass straight to printing, coating, or assembly.
    • Built in Farmington. Like every SA machine, this flame treating conveyor is designed and manufactured in Farmington, Connecticut for decades of continuous use, with the same commitment to quality, safety, and performance behind the Flame 360 and the Bottle Treater.

    Built for the line, not the bench

    • Same flame, every part. A fixed burner over a belt at a set speed removes operator variability. Dial in height, speed, and air-to-fuel once and run.
    • Sized to the product. Burner lengths from 6″ to 35″ and 1″ to 30″+ of height adjustment cover flat panels, molded parts, trays, and sheet goods without a custom machine.
    • Drops into existing lines. 120V, 80 PSI, and your choice of propane or natural gas. Feed from an upstream process or load by hand, then pass straight to printing, coating, or assembly.
    • Need more than flame? For the hardest-to-bond inks and coatings, FieroSil™ pretreatment integrates with SA conveyors. For cylindrical products, see the Flame 360 and the Bottle Treater.

    Flame treatment conveyor specifications

    Fuel, utilities, burner, belt and safety.

    Fuel
    Propane or natural gas. Specify at order.
    Electrical
    Standard 120V power.
    Pneumatic
    80 PSI compressed air.
    Burner length
    Available from 6″ (152 mm) to 35″ (889 mm) for precise coverage of different product sizes.
    Burner height
    Adjustable from 1″ (25 mm) to 30″+ (760 mm+) above the belt. Set with Bessey quick clamps, no tools.
    Conveyor speed
    Choose a 1 to 10 ft/min (0.3 to 3 m/min) range or a 5 to 50 ft/min (1.5 to 15 m/min) range.
    Flame control
    Easily adjustable air-to-fuel ratio for fine-tuning the flame to the material.
    Belt
    Stainless steel mesh. Heat resistant, long service life. Width built to size for your product.
    Frame
    Welded steel with a powder-coated finish.
    Safety
    Fully enclosed burner area with safety cage. Front and rear access doors are interlocked and shut the system down when opened.

    Flame treatment conveyor features

    Advantages, standard features, engineering features and options.

    Advantages and standard features

    • Flexible fuel operation. Compatible with both propane and natural gas for versatile installation options.
    • Simple utility requirements. Standard 120V electrical power and 80 PSI compressed air. No special service needed.
    • Custom burner lengths. Burners available from 6″ to 35″, so coverage matches your product precisely.
    • Adjustable burner height. Position the burner from 1″ to 30″+ above the conveyor to suit a wide range of part geometries.
    • Variable conveyor speed. Choose a 1 to 10 ft/min range or a 5 to 50 ft/min range for optimal treatment control.
    • Precise flame control. An easily adjustable air-to-fuel ratio lets the operator fine-tune the flame for consistent results.
    • Burner height set with Bessey quick clamps for fast setup and changeover.
    • Easily adjustable air-to-fuel ratio for fine-tuning the flame at the machine.
    • Propane or natural gas, specified at order.
    • Standard 120V electrical power and 80 PSI compressed air.
    • Variable conveyor speed: 1 to 10 ft/min or 5 to 50 ft/min range.

    Engineering features

    • Durable stainless steel mesh belt. Heat resistant, long service life.
    • Heavy-duty welded steel frame with a powder-coated finish for demanding industrial environments.
    • Integrated safety system: fully enclosed burner area with a safety cage. Front and rear interlocked access doors shut the system down when opened.
    • Industrial-grade design engineered to withstand decades of continuous operation with minimal maintenance.

    Options

    • Burner length: 6″ to 35″
    • Conveyor speed range: 1 to 10 ft/min or 5 to 50 ft/min
    • Belt width: built to size for your product
    • Fuel: propane or natural gas
    • Add FieroSil™ for the hardest-to-bond inks and coatings

    What the flame conveyor treats

    Flat and shaped parts that need a better ink, coating, or adhesive bond before the next process.

    Typical applications

    • Plastic housings and panels
    • Polyethylene and polypropylene components
    • Molded parts
    • Trays and lids
    • Sheet goods
    • If your part rides a belt, we can treat it. Send us a sample and we’ll run it.

    Not sure what you’re looking for?

    Flame conveyor questions

    What fuel does the flame conveyor run on?

    Propane or natural gas. Specify which at order.

    What utilities does it need?

    Standard 120V electrical power and 80 PSI compressed air. No special service is needed.

    What burner lengths are available?

    From 6 inches (152 mm) to 35 inches (889 mm), sized to your part.

    How fast does the belt run?

    You choose one of two ranges: 1 to 10 ft/min or 5 to 50 ft/min.

    How high can the burner sit above the belt?

    From 1 inch to 30 inches or more. It is set with Bessey quick clamps, no tools.

    What happens if a door is opened?

    The burner area is fully enclosed, and the front and rear access doors are interlocked. Opening a door shuts the system down.

    Can FieroSil be added?

    Yes. FieroSil pretreatment integrates with SA conveyors for the hardest-to-bond inks and coatings.

    Systems to suit your application and budget

    Not sure what you’re looking for? See applications.