Nameplate Screen Printing Machines
Print serial plates, rating plates, asset tags and faceplates on aluminum, stainless, polycarbonate and polyester. Screen printing lays down the ink film that survives heat, solvents and years outdoors. Every machine is designed and built in Farmington, Connecticut.
Machines for nameplates
Model F1
Semi-automatic
- Approximately 1,800 plates per hour
- Print plate flat within +/- .001 in
- CNC machined fixture holds each plate in register
- Fully pneumatic, never obsolete
Model 810
Semi-automatic
- Approximately 1,800 plates per hour
- Clamshell opens wide for fast loading
- Vacuum table option holds thin plates flat
- Prints flat and cylindrical parts
Model SST
Automatic
- Up to six colors in one cycle
- +/- .001 in registration color to color
- Servo driven sliding table
- Touchscreen sequence and cure control
Plates we print
Flat parts on the Model F1
- Aluminum and stainless steel nameplates and data plates
- Serial and rating plates
- Asset tags, pole markers and safety signs
- Polycarbonate and polyester labels and faceplates
- Dials, bezels and control panel graphics
- Warning and instruction labels
Each fixture is CNC machined for your plate. Optional automatic vacuum holds thin sheet flat on every print.
Built to stay readable
Complete the line
UV conveyor
UV inks cure in seconds as plates ride through, so they can be handled and stacked right away.
Vacuum table
Thin polyester and polycarbonate sheets stay flat under vacuum for tight registration on every pass.
Nameplate Printing FAQ
Which machine do I need?
One or two colors on a mix of plate sizes runs on the F1 or the 810. Multicolor plates in volume run on the SST, which prints up to six colors in one cycle. Tell us your plates and volume and we will match the machine.
Will the ink hold up outdoors?
Screen printing puts down a thick ink film. With the right ink and pretreatment the print stands up to heat, solvents and weather for years.
How do you hold a thin plate flat?
A CNC machined fixture locates the plate. Optional automatic vacuum pulls thin sheet flat on every print.
Can you print anodized aluminum and stainless?
Yes. Pretreatment and ink choice are matched to the metal so the print bonds.
How are the plates cured?
UV inks cure in seconds on a UV conveyor. Solvent inks air dry or run through a dryer.
How long does delivery take?
The F1 and the 810 typically ship in 1 to 2 weeks. Ask us for the current SST lead time. All three are built in Farmington, Connecticut with a 1 year limited warranty.
Tell us about your plates
Share the material, size, number of colors and how many you print a year. An engineer will recommend the right machine and fixture.
Some of our satisfied customers
